| Make Your Own | Field Reports |
Originally posted November 25th, 2015 in the Library Journal. [gallery type=”slideshow” size=”large” ids=”238,239,240,241,242,243” orderby=”rand”]
Posts by Category
oneKey
Current Prototypeon The Right Keeping My
[gallery] Current prototype(on the right), keeping my fingers crossed!
OneKey: Update 3/21
[gallery] With the new circuit I’m working on … because it uses the Arduino IDE to program it Ardublock can be used. Ardublock is an interface t...
I Began Working On A New Circuit That Halves The
[gallery] I began working on a new circuit that halves the cost of the MMM. It’s slowly coming together.
Maker Corps Info and Q&A Session 3.04.14
Maker Corps Info and Q&A Session 3.04.14<div class="link_description"><blockquote class="link_og_blockquote">Find out more about Maker Corps,...
We Were At Stamp Act Day At Hamilton Hall Uarts
[gallery] We were at STAMP ACT day at Hamilton hall @ UArts. It was a day filled with youth and young adults interacting with our stuffs and looking for summ...
We Got A Vinyl Cutter At Our New Space In The
[gallery] We got a vinyl cutter at our new space in the library! ^_^ We’ve also acquired a 3D printer in our newly named “5A lab”!
Victor Made His Own Makey Makey Today He Was So
[gallery] Victor made his own MaKey MaKey today. He was so stoked about it. “I can’t wait to go home and break my computer!” “Can we ...
Victor 9 At Kensington Was Playing With One Of
[gallery] Victor, 9, at kensington was playing with one of my prototypes. He found some LEDs and began powering them by shorting the traces. He seems really ...
Some Pics From The Instructors Workshop It Was
[gallery] Some pics from the instructors workshop. It was interesting to see how many questions came out of every little step throughout the process of makin...
Those Striped Jawns Are Resistors They Are
[gallery] “those “striped jawns” are resistors. they are like water taps for electricity that only allow a little [water] through”
What Even Is This I Dont Understand What Is
[gallery] “what even is this… …I don’t understand what is going on there…“ Eric’s response to K-Fai showing him pictures @ ...
makerjawn/jawnware
makerjawn/jawnware
Had An Idea Today As I Contemplated A Usb Toy
Had an idea today as I contemplated a USB toy business-card. One of the larger costs is the usb cable, which up to this point I’ve been able to scrap o...
I Had To Get Windows And Install Atmelstudio 6 To
[gallery] I had to get Windows and install AtmelStudio 6 to work on recompiling a .hex for the Attiny85. After a bit of research and tinkering it worked. It&...
Got My Code Recompiled
//instagram.com/p/krfgC0Gcth/embed/ got my code recompiled!
2.21jawnware check-in
//e.issuu.com/embed.js<p>✔ Material Exploration.</p> The vinyl cutter pushes the copper tape past just making simple circuits(with ease). ✔ Code...
Teen Tech Week
Teen Tech Week<div class="link_description"><blockquote class="link_og_blockquote">Celebrate technology for teens at your library this March with...
Collaborative Work
[gallery] This sort of collaboration was awesome to see. Shanaya(12), Brandon(9), and Judas(14) worked in a team to hold the soldering iron, the solder, and...
User Testing / Test Workshop
[gallery] Peeling the sticker was not an issue, but it was a bit difficult for the kids to keep it together in the transition and peel back the excess. &frac...
Initial Kit Used
[gallery] This is the kit I utilized for my first workshop / testing with the MakeyMakeyMakey. (l-r) Safety Glasses Soldering Iron Solder Helping Hands, &ldq...
Prototype & Tolerance
[gallery] I’ve finally gotten the hang of the process of cutting them without too much waste. Notice how close the cuts are now! If i make them closer I risk...
Resource Images
[gallery] components to help me prototype in illustrator + for documentation/instructor materials
K.I.S.S.
My earlier(and hastily done) circuit sketch is leading me to consider focusing on simplified units(K.I.S.S) to deploy as my first iteration. These simple ver...
Vinylcut Prototype Update
[gallery] There is still a little bit more work needed on the actual cut circuit, it’s not fully functional yet. Just a matter of retracing my steps and maki...
Hardware limit
[gallery] A thought occurred to me, so far I have only been working with one key input . This has allowed for my circuit to remain simple as there is only th...
Two Circuits
[gallery] I forked Flip’s 4-key-keyboard to begin the second iteration. This evening I took the dive into compiling my own .HEX files. The process of compili...
Design Specs for Copper Tape
[gallery] This past week I iterated with physically to push past my initial units shortcomings. I was focused on two things in my iterations: usability ad fu...
Research Book Done
//e.issuu.com/embed.js
Uncategorized
| Make Your Own | Field Reports |
Originally posted November 25th, 2015 in the Library Journal. [gallery type=”slideshow” size=”large” ids=”238,239,240,241,242,243” orderby=”rand”]
Current Prototypeon The Right Keeping My
[gallery] Current prototype(on the right), keeping my fingers crossed!
OneKey: Update 3/21
[gallery] With the new circuit I’m working on … because it uses the Arduino IDE to program it Ardublock can be used. Ardublock is an interface t...
I Began Working On A New Circuit That Halves The
[gallery] I began working on a new circuit that halves the cost of the MMM. It’s slowly coming together.
Maker Corps Info and Q&A Session 3.04.14
Maker Corps Info and Q&A Session 3.04.14<div class="link_description"><blockquote class="link_og_blockquote">Find out more about Maker Corps,...
We Were At Stamp Act Day At Hamilton Hall Uarts
[gallery] We were at STAMP ACT day at Hamilton hall @ UArts. It was a day filled with youth and young adults interacting with our stuffs and looking for summ...
We Got A Vinyl Cutter At Our New Space In The
[gallery] We got a vinyl cutter at our new space in the library! ^_^ We’ve also acquired a 3D printer in our newly named “5A lab”!
Victor Made His Own Makey Makey Today He Was So
[gallery] Victor made his own MaKey MaKey today. He was so stoked about it. “I can’t wait to go home and break my computer!” “Can we ...
Victor 9 At Kensington Was Playing With One Of
[gallery] Victor, 9, at kensington was playing with one of my prototypes. He found some LEDs and began powering them by shorting the traces. He seems really ...
Some Pics From The Instructors Workshop It Was
[gallery] Some pics from the instructors workshop. It was interesting to see how many questions came out of every little step throughout the process of makin...
Those Striped Jawns Are Resistors They Are
[gallery] “those “striped jawns” are resistors. they are like water taps for electricity that only allow a little [water] through”
What Even Is This I Dont Understand What Is
[gallery] “what even is this… …I don’t understand what is going on there…“ Eric’s response to K-Fai showing him pictures @ ...
makerjawn/jawnware
makerjawn/jawnware
Had An Idea Today As I Contemplated A Usb Toy
Had an idea today as I contemplated a USB toy business-card. One of the larger costs is the usb cable, which up to this point I’ve been able to scrap o...
I Had To Get Windows And Install Atmelstudio 6 To
[gallery] I had to get Windows and install AtmelStudio 6 to work on recompiling a .hex for the Attiny85. After a bit of research and tinkering it worked. It&...
Got My Code Recompiled
//instagram.com/p/krfgC0Gcth/embed/ got my code recompiled!
2.21jawnware check-in
//e.issuu.com/embed.js<p>✔ Material Exploration.</p> The vinyl cutter pushes the copper tape past just making simple circuits(with ease). ✔ Code...
Teen Tech Week
Teen Tech Week<div class="link_description"><blockquote class="link_og_blockquote">Celebrate technology for teens at your library this March with...
Collaborative Work
[gallery] This sort of collaboration was awesome to see. Shanaya(12), Brandon(9), and Judas(14) worked in a team to hold the soldering iron, the solder, and...
User Testing / Test Workshop
[gallery] Peeling the sticker was not an issue, but it was a bit difficult for the kids to keep it together in the transition and peel back the excess. &frac...
Initial Kit Used
[gallery] This is the kit I utilized for my first workshop / testing with the MakeyMakeyMakey. (l-r) Safety Glasses Soldering Iron Solder Helping Hands, &ldq...
Prototype & Tolerance
[gallery] I’ve finally gotten the hang of the process of cutting them without too much waste. Notice how close the cuts are now! If i make them closer I risk...
Resource Images
[gallery] components to help me prototype in illustrator + for documentation/instructor materials
K.I.S.S.
My earlier(and hastily done) circuit sketch is leading me to consider focusing on simplified units(K.I.S.S) to deploy as my first iteration. These simple ver...
Vinylcut Prototype Update
[gallery] There is still a little bit more work needed on the actual cut circuit, it’s not fully functional yet. Just a matter of retracing my steps and maki...
Hardware limit
[gallery] A thought occurred to me, so far I have only been working with one key input . This has allowed for my circuit to remain simple as there is only th...
Two Circuits
[gallery] I forked Flip’s 4-key-keyboard to begin the second iteration. This evening I took the dive into compiling my own .HEX files. The process of compili...
Design Specs for Copper Tape
[gallery] This past week I iterated with physically to push past my initial units shortcomings. I was focused on two things in my iterations: usability ad fu...
Research Book Done
//e.issuu.com/embed.js
Gallery
Current Prototypeon The Right Keeping My
[gallery] Current prototype(on the right), keeping my fingers crossed!
OneKey: Update 3/21
[gallery] With the new circuit I’m working on … because it uses the Arduino IDE to program it Ardublock can be used. Ardublock is an interface t...
I Began Working On A New Circuit That Halves The
[gallery] I began working on a new circuit that halves the cost of the MMM. It’s slowly coming together.
We Were At Stamp Act Day At Hamilton Hall Uarts
[gallery] We were at STAMP ACT day at Hamilton hall @ UArts. It was a day filled with youth and young adults interacting with our stuffs and looking for summ...
We Got A Vinyl Cutter At Our New Space In The
[gallery] We got a vinyl cutter at our new space in the library! ^_^ We’ve also acquired a 3D printer in our newly named “5A lab”!
Victor Made His Own Makey Makey Today He Was So
[gallery] Victor made his own MaKey MaKey today. He was so stoked about it. “I can’t wait to go home and break my computer!” “Can we ...
Victor 9 At Kensington Was Playing With One Of
[gallery] Victor, 9, at kensington was playing with one of my prototypes. He found some LEDs and began powering them by shorting the traces. He seems really ...
Some Pics From The Instructors Workshop It Was
[gallery] Some pics from the instructors workshop. It was interesting to see how many questions came out of every little step throughout the process of makin...
Those Striped Jawns Are Resistors They Are
[gallery] “those “striped jawns” are resistors. they are like water taps for electricity that only allow a little [water] through”
What Even Is This I Dont Understand What Is
[gallery] “what even is this… …I don’t understand what is going on there…“ Eric’s response to K-Fai showing him pictures @ ...
I Had To Get Windows And Install Atmelstudio 6 To
[gallery] I had to get Windows and install AtmelStudio 6 to work on recompiling a .hex for the Attiny85. After a bit of research and tinkering it worked. It&...
Collaborative Work
[gallery] This sort of collaboration was awesome to see. Shanaya(12), Brandon(9), and Judas(14) worked in a team to hold the soldering iron, the solder, and...
User Testing / Test Workshop
[gallery] Peeling the sticker was not an issue, but it was a bit difficult for the kids to keep it together in the transition and peel back the excess. &frac...
Initial Kit Used
[gallery] This is the kit I utilized for my first workshop / testing with the MakeyMakeyMakey. (l-r) Safety Glasses Soldering Iron Solder Helping Hands, &ldq...
Prototype & Tolerance
[gallery] I’ve finally gotten the hang of the process of cutting them without too much waste. Notice how close the cuts are now! If i make them closer I risk...
Resource Images
[gallery] components to help me prototype in illustrator + for documentation/instructor materials
Vinylcut Prototype Update
[gallery] There is still a little bit more work needed on the actual cut circuit, it’s not fully functional yet. Just a matter of retracing my steps and maki...
Hardware limit
[gallery] A thought occurred to me, so far I have only been working with one key input . This has allowed for my circuit to remain simple as there is only th...
Two Circuits
[gallery] I forked Flip’s 4-key-keyboard to begin the second iteration. This evening I took the dive into compiling my own .HEX files. The process of compili...
Design Specs for Copper Tape
[gallery] This past week I iterated with physically to push past my initial units shortcomings. I was focused on two things in my iterations: usability ad fu...
Blog
Post: Link Permalink
This theme supports link posts, made famous by John Gruber. To use, just add link: http://url-you-want-linked to the post’s YAML front matter and you’re done.
Post: Quote
Only one thing is impossible for God: To find any sense in any copyright law on the planet. Mark Twain
Post: Notice
A notice displays information that explains nearby content. Often used to call attention to a particular detail.
Post: Chat
Abbott: Strange as it may seem, they give ball players nowadays very peculiar names.
Post: Standard
All children, except one, grow up. They soon know that they will grow up, and the way Wendy knew was this. One day when she was two years old she was playing...
Post: Modified Date
This post has been updated and should show a modified date if used in a layout.
Archive
Archive: Making Possibilities at the Village
Originally Posted June 30, 2013 on the Maker Jawn Blog:
Archive: Makey Makey Workshop @ Spells
Originally posted August 8, 2013 on the Maker Jawn Blog: Last Wednesday I held a Makey Makey workshop at Spells Writing Lab. Our game controller workshop was...
Archive: Magnet Explorations
Originally Posted June 20, 2013 on the Maker Jawn Blog [vimeo 68745627 w=640 h=360]Paul started toying around with LEDs today and just “wanted to make someth...
Maker Jawn
Archive: Making Possibilities at the Village
Originally Posted June 30, 2013 on the Maker Jawn Blog:
Archive: Makey Makey Workshop @ Spells
Originally posted August 8, 2013 on the Maker Jawn Blog: Last Wednesday I held a Makey Makey workshop at Spells Writing Lab. Our game controller workshop was...
Archive: Magnet Explorations
Originally Posted June 20, 2013 on the Maker Jawn Blog [vimeo 68745627 w=640 h=360]Paul started toying around with LEDs today and just “wanted to make someth...
Link
Maker Corps Info and Q&A Session 3.04.14
Maker Corps Info and Q&A Session 3.04.14<div class="link_description"><blockquote class="link_og_blockquote">Find out more about Maker Corps,...
makerjawn/jawnware
makerjawn/jawnware
Teen Tech Week
Teen Tech Week<div class="link_description"><blockquote class="link_og_blockquote">Celebrate technology for teens at your library this March with...
Mazes
Archive: Making Possibilities at the Village
Originally Posted June 30, 2013 on the Maker Jawn Blog:
Archive: Magnet Explorations
Originally Posted June 20, 2013 on the Maker Jawn Blog [vimeo 68745627 w=640 h=360]Paul started toying around with LEDs today and just “wanted to make someth...
Library
blog
Welcome to Jekyll!
You’ll find this post in your _posts directory. Go ahead and edit it and re-build the site to see your changes. You can rebuild the site in many different wa...